Hi all
=20
I'm trying to use a graphical checkbox, this has a picture and a
downpicture with the caption set to 12 (middle)
=20
The backcolour of the contrainer is set to a pale blue and the image is
a dark blue. The checkbox is working as I'd expect it to but has an
awful white and black border round it=20
=20
Does anyone know how to get rid of the border please?
=20
Regards
Graham=20
--- StripMime Report -- processed MIME parts ---
multipart/alternative
text/plain (text body -- kept)
text/html
---
I haven't tried this in 8, but in the old days, if the graphic is a
BMP, we needed a .msk (mask) file to accompany it.
To create a .msk file:
- open the button graphic in your favourite graphics program
- invert the colours
- save it with the same name, but use a .msk extension
Be sure to "clear resources" to test.
Ken
I have checkboxes in a grid that I want to behave in a certain way. I
want the checkbox to display the control source - checked or unchecked -
but I want it to be "read only." I also want a double click to pop up a
form. Everything works fine except I can't get the click or double
click to not change the value. The only thing I want to happen is the
double click event. I have tried nodefault in the click and read only,
but it still changes the value when clicked.
How do I make it so the double click is the only thing that happens on
the checkbox?
TIA
--
Jeff
Jeff Johnson
jeff@dcsoftware.com
(623) 582-0323
Please reply to jeff@san-dc.com!
Visit our forum at www.san-dc.com/forum
Register and join in the discussion
_______________________________________________
Post Messages to: ProFox@leafe.com
Subscription Maintenance: http://mail.leafe.com/mailman/listinfo/profox
OT-free version of this list: http://mail.leafe.com/mailman/listinfo/profoxtech
Searchable Archive: http://leafe.com/archives/search/profox
This message: http://leafe.com/archives/byMID/profox/5404C3C2.8020403@dcsoftware.com
** All postings, unless explicitly stated otherwise, are the opinions of the author, and do not constitute legal or medical advice. This statement is added to the messages for those lawyers who are too stupid to see the obvious.
Jeff - this may be a WAG - but, It doesn't make sense to make a Control
Read-Only - and, yet, still expect to interact with it!
Here's another WAG on how to resolve the issue - make a FAKE looking
Checkbox - just an Image you create w/PC Paint - then Display THAT image
- and NOT the Real Checkbox - then it can't get Check, U need NOT worry
about Read-Only, and then implement code in Click or Double-click to
make your pop-up appear.
Again - just a guess/suggestion how to do it - even though it may seem
strange...
-K-
On 9/1/2014 3:06 PM, Jeff Johnson wrote:
> I have checkboxes in a grid that I want to behave in a certain way. I
> want the checkbox to display the control source - checked or unchecked
> - but I want it to be "read only." I also want a double click to pop
> up a form. Everything works fine except I can't get the click or
> double click to not change the value. The only thing I want to happen
> is the double click event. I have tried nodefault in the click and
> read only, but it still changes the value when clicked.
>
> How do I make it so the double click is the only thing that happens on
> the checkbox?
>
> TIA
>
_______________________________________________
Post Messages to: ProFox@leafe.com
Subscription Maintenance: http://mail.leafe.com/mailman/listinfo/profox
OT-free version of this list: http://mail.leafe.com/mailman/listinfo/profoxtech
Searchable Archive: http://leafe.com/archives/search/profox
This message: http://leafe.com/archives/byMID/profox/5404C7CA.5020305@optonline.net
** All postings, unless explicitly stated otherwise, are the opinions of the author, and do not constitute legal or medical advice. This statement is added to the messages for those lawyers who are too stupid to see the obvious.
Read only and nodefault in the click and double click have no affect on
the control. It still checks and unchecks normally.
On 9/1/2014 12:23 PM, Kurt @ VR-FX wrote:
> Jeff - this may be a WAG - but, It doesn't make sense to make a
> Control Read-Only - and, yet, still expect to interact with it!
>
> Here's another WAG on how to resolve the issue - make a FAKE looking
> Checkbox - just an Image you create w/PC Paint - then Display THAT
> image - and NOT the Real Checkbox - then it can't get Check, U need
> NOT worry about Read-Only, and then implement code in Click or
> Double-click to make your pop-up appear.
>
> Again - just a guess/suggestion how to do it - even though it may seem
> strange...
>
> -K-
>
>
> On 9/1/2014 3:06 PM, Jeff Johnson wrote:
>> I have checkboxes in a grid that I want to behave in a certain way. I
>> want the checkbox to display the control source - checked or
>> unchecked - but I want it to be "read only." I also want a double
>> click to pop up a form. Everything works fine except I can't get the
>> click or double click to not change the value. The only thing I want
>> to happen is the double click event. I have tried nodefault in the
>> click and read only, but it still changes the value when clicked.
>>
>> How do I make it so the double click is the only thing that happens
>> on the checkbox?
>>
>> TIA
>>
>
>
[excessive quoting removed by server]
_______________________________________________
Post Messages to: ProFox@leafe.com
Subscription Maintenance: http://mail.leafe.com/mailman/listinfo/profox
OT-free version of this list: http://mail.leafe.com/mailman/listinfo/profoxtech
Searchable Archive: http://leafe.com/archives/search/profox
This message: http://leafe.com/archives/byMID/profox/5404C897.20100@san-dc.com
** All postings, unless explicitly stated otherwise, are the opinions of the author, and do not constitute legal or medical advice. This statement is added to the messages for those lawyers who are too stupid to see the obvious.
return .f. in the valid for the checkbox?
Jeff Johnson wrote:
> I have checkboxes in a grid that I want to behave in a certain way. I
> want the checkbox to display the control source - checked or unchecked
> - but I want it to be "read only." I also want a double click to pop
> up a form. Everything works fine except I can't get the click or
> double click to not change the value. The only thing I want to happen
> is the double click event. I have tried nodefault in the click and
> read only, but it still changes the value when clicked.
>
> How do I make it so the double click is the only thing that happens on
> the checkbox?
>
> TIA
>
_______________________________________________
Post Messages to: ProFox@leafe.com
Subscription Maintenance: http://mail.leafe.com/mailman/listinfo/profox
OT-free version of this list: http://mail.leafe.com/mailman/listinfo/profoxtech
Searchable Archive: http://leafe.com/archives/search/profox
This message: http://leafe.com/archives/byMID/profox/5404C97D.7000509@ggisoft.com
** All postings, unless explicitly stated otherwise, are the opinions of the author, and do not constitute legal or medical advice. This statement is added to the messages for those lawyers who are too stupid to see the obvious.
Try this in the click event:
if this.value = .t.
this.value = .t.
else
this.value = .f.
endif
I did not try it but the click event will change a .t. to a .f. Then you
should leave a .t. as a .t. and a .f. as a .f.
Rafael Copquin
El 01/09/2014 16:06, Jeff Johnson escribió:
> I have checkboxes in a grid that I want to behave in a certain way. I
> want the checkbox to display the control source - checked or unchecked
> - but I want it to be "read only." I also want a double click to pop
> up a form. Everything works fine except I can't get the click or
> double click to not change the value. The only thing I want to happen
> is the double click event. I have tried nodefault in the click and
> read only, but it still changes the value when clicked.
>
> How do I make it so the double click is the only thing that happens on
> the checkbox?
>
> TIA
>
_______________________________________________
Post Messages to: ProFox@leafe.com
Subscription Maintenance: http://mail.leafe.com/mailman/listinfo/profox
OT-free version of this list: http://mail.leafe.com/mailman/listinfo/profoxtech
Searchable Archive: http://leafe.com/archives/search/profox
This message: http://leafe.com/archives/byMID/profox/5404CA32.4050501@fibertel.com.ar
** All postings, unless explicitly stated otherwise, are the opinions of the author, and do not constitute legal or medical advice. This statement is added to the messages for those lawyers who are too stupid to see the obvious.
Neither this nor the return false from the valid work.
On 9/1/2014 12:34 PM, Rafael Copquin wrote:
> Try this in the click event:
>
> if this.value = .t.
> this.value = .t.
> else
> this.value = .f.
> endif
>
> I did not try it but the click event will change a .t. to a .f. Then
> you should leave a .t. as a .t. and a .f. as a .f.
> Rafael Copquin
>
>
> El 01/09/2014 16:06, Jeff Johnson escribió:
>> I have checkboxes in a grid that I want to behave in a certain way. I
>> want the checkbox to display the control source - checked or
>> unchecked - but I want it to be "read only." I also want a double
>> click to pop up a form. Everything works fine except I can't get the
>> click or double click to not change the value. The only thing I want
>> to happen is the double click event. I have tried nodefault in the
>> click and read only, but it still changes the value when clicked.
>>
>> How do I make it so the double click is the only thing that happens
>> on the checkbox?
>>
>> TIA
>>
>
>
[excessive quoting removed by server]
_______________________________________________
Post Messages to: ProFox@leafe.com
Subscription Maintenance: http://mail.leafe.com/mailman/listinfo/profox
OT-free version of this list: http://mail.leafe.com/mailman/listinfo/profoxtech
Searchable Archive: http://leafe.com/archives/search/profox
This message: http://leafe.com/archives/byMID/profox/5404CC5B.3000008@san-dc.com
** All postings, unless explicitly stated otherwise, are the opinions of the author, and do not constitute legal or medical advice. This statement is added to the messages for those lawyers who are too stupid to see the obvious.
On Mon, Sep 1, 2014 at 3:06 PM, Jeff Johnson <jeff@dcsoftware.com> wrote:
> I have checkboxes in a grid that I want to behave in a certain way.
I have a radical suggestion. If you want to have a checkbox in a grid, but
you don't want it to act like a checkbox, perhaps using the checkbox
control is not what you want to do.
Perhaps you should use a less interactive control, like a textbox or a
picture button, and then add it it the data-binding and behaviors you want.
I'm not certain it would work in this case, but as a general rule, I've
found it easier to add my own custom behaviors in Fox than to try to block
a control from doing what it was designed to do.
--
Ted Roche
Ted Roche & Associates, LLC
--- StripMime Report -- processed MIME parts ---
multipart/alternative
text/plain (text body -- kept)
text/html
---
_______________________________________________
Post Messages to: ProFox@leafe.com
Subscription Maintenance: http://mail.leafe.com/mailman/listinfo/profox
OT-free version of this list: http://mail.leafe.com/mailman/listinfo/profoxtech
Searchable Archive: http://leafe.com/archives/search/profox
This message: http://leafe.com/archives/byMID/profox/CACW6n4vHDLFu60L54XfvmUSbLpctSw73ygL4eZOHbkcmu26AyA@mail.gmail.com
** All postings, unless explicitly stated otherwise, are the opinions of the author, and do not constitute legal or medical advice. This statement is added to the messages for those lawyers who are too stupid to see the obvious.
On 9/1/2014 12:49 PM, Ted Roche wrote:
> On Mon, Sep 1, 2014 at 3:06 PM, Jeff Johnson <jeff@dcsoftware.com> wrote:
>
>> I have checkboxes in a grid that I want to behave in a certain way.
>
> I have a radical suggestion. If you want to have a checkbox in a grid, but
> you don't want it to act like a checkbox, perhaps using the checkbox
> control is not what you want to do.
>
> Perhaps you should use a less interactive control, like a textbox or a
> picture button, and then add it it the data-binding and behaviors you want.
>
> I'm not certain it would work in this case, but as a general rule, I've
> found it easier to add my own custom behaviors in Fox than to try to block
> a control from doing what it was designed to do.
>
>
What I want is the visual aspect of a check box. I want a box checked
or unchecked based on the control source. I don't want it to do
anything other than run a popup on the double click - which actually
changes the value.
I can do this sort of thing with any other controls but the checkbox
does not appear to respond to readonly or nodefault.
Thanks,
--
Jeff
Jeff Johnson
jeff@san-dc.com
SanDC, Inc.
(623) 582-0323
SMS (602) 717-5476
Fax 623-869-0675
Visit our forum at www.san-dc.com/forum
Register and join in the discussion
www.san-dc.com
www.cremationtracker.com
www.agentrelationshipmanager.com
_______________________________________________
Post Messages to: ProFox@leafe.com
Subscription Maintenance: http://mail.leafe.com/mailman/listinfo/profox
OT-free version of this list: http://mail.leafe.com/mailman/listinfo/profoxtech
Searchable Archive: http://leafe.com/archives/search/profox
This message: http://leafe.com/archives/byMID/profox/5404CE8C.2010801@san-dc.com
** All postings, unless explicitly stated otherwise, are the opinions of the author, and do not constitute legal or medical advice. This statement is added to the messages for those lawyers who are too stupid to see the obvious.