Hi,
I have to work on all the pupils in a classroom but one or two. So I built a
listbox with the name of all the pupils (about 35). In the init of the listbox,
I 'select' all the lines.
If I ctrl+clic on a pupil, it becomes unselected and selected again if I redo
the ctrl-clic. It's exactly what I want. It works great.
But if I forgot to press the CTRL key (and it will happen very often), all the
pupils become unselected at the same time and it is unbearable.
I didn't find a mean to 'simulate' the CTRL key in the click event or the
mousedown event ! Have you an idea ?
TIA
The Foxil
_______________________________________________
Post Messages to: ProFox@leafe.com
Subscription Maintenance: http://mail.leafe.com/mailman/listinfo/profox
OT-free version of this list: http://mail.leafe.com/mailman/listinfo/profoxtech
Searchable Archive: http://leafe.com/archives/search/profox
This message: http://leafe.com/archives/byMID/profox/533B9BE8.6070804@wanadoo.fr
** All postings, unless explicitly stated otherwise, are the opinions of the author, and do not constitute legal or medical advice. This statement is added to the messages for those lawyers who are too stupid to see the obvious.
>But if I forgot to press the CTRL key (and it will happen very often), all
>the pupils become unselected at the same time and it is unbearable.
>I didn't find a mean to 'simulate' the CTRL key in the click event or the
>mousedown event ! Have you an idea ?
Well, off the top of my head (mostly because I can't test it here at the
moment):
Will nodefault prevent the issue? Either in keypress, click, or mousedown?
If so, you can use the nShift (the second one, if I remember right)
parameter of mousedown to detect whether the Control key is pressed. I'm
not sure if there's a way to simulate Control-Click, but you might be able
to use Keyboard "{CTRL+SPACEBAR}" to effectively do the same thing.
Alternatively, code to detect a keypress combination (Control-A, for
example), that just resets all of the pupils to selected again. If you
only need to deselect a couple of students and you screw up, you just hit
Control-A and be more careful next time.
Joel
_______________________________________________
Post Messages to: ProFox@leafe.com
Subscription Maintenance: http://mail.leafe.com/mailman/listinfo/profox
OT-free version of this list: http://mail.leafe.com/mailman/listinfo/profoxtech
Searchable Archive: http://leafe.com/archives/search/profox
This message: http://leafe.com/archives/byMID/profox/CC00D752DB174D79949D32C942223727@ASUS1
** All postings, unless explicitly stated otherwise, are the opinions of the author, and do not constitute legal or medical advice. This statement is added to the messages for those lawyers who are too stupid to see the obvious.
You have four parameters in the MouseDown Event, the nShift allow u
to check for the CTRL key.
I prefer the KeyPress event.
E.
On Wednesday, April 2, 2014 2:11 AM, Jean MAURICE <jsm.maurice@wanadoo.fr> wrote:
Hi,
>
>I have to work on all the pupils in a classroom but one or two. So I built a
>listbox with the name of all the pupils (about 35). In the init of the listbox,
>I 'select' all the lines.
>
>If I ctrl+clic on a pupil, it becomes unselected and selected again if I redo
>the ctrl-clic. It's exactly what I want. It works great.
>
>But if I forgot to press the CTRL key (and it will happen very often), all the
>pupils become unselected at the same time and it is unbearable.
>
>I didn't find a mean to 'simulate' the CTRL key in the click event or the
>mousedown event ! Have you an idea ?
>
>TIA
>The Foxil
>
[excessive quoting removed by server]
_______________________________________________
Post Messages to: ProFox@leafe.com
Subscription Maintenance: http://mail.leafe.com/mailman/listinfo/profox
OT-free version of this list: http://mail.leafe.com/mailman/listinfo/profoxtech
Searchable Archive: http://leafe.com/archives/search/profox
This message: http://leafe.com/archives/byMID/profox/1396437354.90161.YahooMailNeo@web163403.mail.gq1.yahoo.com
** All postings, unless explicitly stated otherwise, are the opinions of the author, and do not constitute legal or medical advice. This statement is added to the messages for those lawyers who are too stupid to see the obvious.
>> But if I forgot to press the CTRL key (and it will happen very
>> often), all
>> the pupils become unselected at the same time and it is unbearable.
>
>> I didn't find a mean to 'simulate' the CTRL key in the click event or
>> the
>> mousedown event ! Have you an idea ?
>
Rather than change the way standard interface items work (admittedly, in
this case, more difficult than they should), how about some other work
arounds:
1) Add a 'Select All' button near the list box so you can reset them all
to be selected and then de-select again.
2) Change the listbox to a grid with a first column of a checkbox so you
can select/de-select with just a click, rather than control-click, and
don't have to mess with the range features.
3) Enable the system edit menu (untested) or capture the Ctrl-A shortcut
when focus is on the listbox to enable the 'Select All' feature.
--
Ted Roche & Associates, LLC http://www.tedroche.com/
_______________________________________________
Post Messages to: ProFox@leafe.com
Subscription Maintenance: http://mail.leafe.com/mailman/listinfo/profox
OT-free version of this list: http://mail.leafe.com/mailman/listinfo/profoxtech
Searchable Archive: http://leafe.com/archives/search/profox
This message: http://leafe.com/archives/byMID/profox/533C1451.3000209@gmail.com
** All postings, unless explicitly stated otherwise, are the opinions of the author, and do not constitute legal or medical advice. This statement is added to the messages for those lawyers who are too stupid to see the obvious.
Hi Ted,
I tried the MOUSE command but with no success (in english it seems to be 'cyclic
redundancy').
So I am going to use a grid ...
Thanks
The Foxil
_______________________________________________
Post Messages to: ProFox@leafe.com
Subscription Maintenance: http://mail.leafe.com/mailman/listinfo/profox
OT-free version of this list: http://mail.leafe.com/mailman/listinfo/profoxtech
Searchable Archive: http://leafe.com/archives/search/profox
This message: http://leafe.com/archives/byMID/profox/533C15D1.5020304@wanadoo.fr
** All postings, unless explicitly stated otherwise, are the opinions of the author, and do not constitute legal or medical advice. This statement is added to the messages for those lawyers who are too stupid to see the obvious.
----- Original Message -----
From: "Jean MAURICE" <jsm.maurice@wanadoo.fr>
To: "ProFox Email List" <profox@leafe.com>
Sent: Wednesday, April 02, 2014 7:11 AM
Subject: how to simulate a ctrl+clic
> Hi,
>
> I have to work on all the pupils in a classroom but one or two. So I built a listbox with the name of all the pupils (about 35).
> In the init of the listbox, I 'select' all the lines.
>
> If I ctrl+clic on a pupil, it becomes unselected and selected again if I redo the ctrl-clic. It's exactly what I want. It works
> great.
>
> But if I forgot to press the CTRL key (and it will happen very often), all the pupils become unselected at the same time and it is
> unbearable.
>
> I didn't find a mean to 'simulate' the CTRL key in the click event or the mousedown event ! Have you an idea ?
>
> TIA
> The Foxil
>
Hello Jean.
Instead of firing out the whole concept of Windows
and its basic functions accepted by our world,
would it not make more sense to simply add
a button for reversing the active selection ?
You can't predict in advance whatever the crap
your users will find ; it will always be bad for you, you know ?
Have you to subscribe to all foolish demands, even the most improbable?
I think there's no problem about your project, it is not a development issue,
but a basic windows training problem.
Gérard.
_______________________________________________
Post Messages to: ProFox@leafe.com
Subscription Maintenance: http://mail.leafe.com/mailman/listinfo/profox
OT-free version of this list: http://mail.leafe.com/mailman/listinfo/profoxtech
Searchable Archive: http://leafe.com/archives/search/profox
This message: http://leafe.com/archives/byMID/profox/35532265B27F4DE4843D6219E18C3A0C@MuriellePC
** All postings, unless explicitly stated otherwise, are the opinions of the author, and do not constitute legal or medical advice. This statement is added to the messages for those lawyers who are too stupid to see the obvious.
Jean
What you could do is put the following in the RightClick method and right click the list when you want to select all the items
For n = 1 This.ListCount
This.Selected(n) = .T.
EndFor
Paul Newton
-----Original Message-----
From: ProfoxTech [mailto:profoxtech-bounces@leafe.com] On Behalf Of Jean MAURICE
Sent: 02 April 2014 06:11
To: profoxtech@leafe.com
Subject: how to simulate a ctrl+clic
Hi,
I have to work on all the pupils in a classroom but one or two. So I built a listbox with the name of all the pupils (about 35). In the init of the listbox, I 'select' all the lines.
If I ctrl+clic on a pupil, it becomes unselected and selected again if I redo the ctrl-clic. It's exactly what I want. It works great.
But if I forgot to press the CTRL key (and it will happen very often), all the pupils become unselected at the same time and it is unbearable.
I didn't find a mean to 'simulate' the CTRL key in the click event or the mousedown event ! Have you an idea ?
TIA
The Foxil
[excessive quoting removed by server]
_______________________________________________
Post Messages to: ProFox@leafe.com
Subscription Maintenance: http://mail.leafe.com/mailman/listinfo/profox
OT-free version of this list: http://mail.leafe.com/mailman/listinfo/profoxtech
Searchable Archive: http://leafe.com/archives/search/profox
This message: http://leafe.com/archives/byMID/profox/9A8106AFB0EF9B44B69045C4448935A2506F04B7@NLBAWEXMBX1.infor.com
** All postings, unless explicitly stated otherwise, are the opinions of the author, and do not constitute legal or medical advice. This statement is added to the messages for those lawyers who are too stupid to see the obvious.
Hi Paul,
selecting all the pupils is not the problem. The issue I want to avoid is : the
operator has deselected 2 pupils and when he/she want to deselect the third one
he/she forgets the CTRL Key and then all pupils are deselected and he/she must
redo the work ... it's not a big problem but just an annoying one !
I am going to use a grid instead of the listbox
Best Regards
The Foxil
_______________________________________________
Post Messages to: ProFox@leafe.com
Subscription Maintenance: http://mail.leafe.com/mailman/listinfo/profox
OT-free version of this list: http://mail.leafe.com/mailman/listinfo/profoxtech
Searchable Archive: http://leafe.com/archives/search/profox
This message: http://leafe.com/archives/byMID/profox/533CEFD8.3090808@wanadoo.fr
** All postings, unless explicitly stated otherwise, are the opinions of the author, and do not constitute legal or medical advice. This statement is added to the messages for those lawyers who are too stupid to see the obvious.
>I am going to use a grid instead of the listbox
As far as I am concerned, this is the best approach. You can put the
grid on a form, to be called when you need to make a selection.
Appropriate code in the click event of the checkboxes on the grid would
enable the user to select or deselect. You can add buttons on the form
to select all, deselect all, revert selections (select a couple of
records, then change your mind and select the rest of the records but
the couple selected before, you name it..). The form would only appear
when you need it and disappear after you made all the selections.
Comboboxes are suitable for the selection of a few records, but are
cumbersome to use, IMHO. Grids, instead, are superb!!
Rafael Copquin
_______________________________________________
Post Messages to: ProFox@leafe.com
Subscription Maintenance: http://mail.leafe.com/mailman/listinfo/profox
OT-free version of this list: http://mail.leafe.com/mailman/listinfo/profoxtech
Searchable Archive: http://leafe.com/archives/search/profox
This message: http://leafe.com/archives/byMID/profox/533D5E2F.8040700@fibertel.com.ar
** All postings, unless explicitly stated otherwise, are the opinions of the author, and do not constitute legal or medical advice. This statement is added to the messages for those lawyers who are too stupid to see the obvious.
At 22:21 2014-04-02, Jean MAURICE <jsm.maurice@wanadoo.fr> wrote:
>Hi Paul,
>
>selecting all the pupils is not the problem. The issue I want to
>avoid is : the operator has deselected 2 pupils and when he/she want
>to deselect the third one he/she forgets the CTRL Key and then all
>pupils are deselected and he/she must redo the work ... it's not a
>big problem but just an annoying one !
>
>I am going to use a grid instead of the listbox
You could use two listboxes. One would start with a list of the
pupils; the other would start empty. Select a pupil name and click
on a move button to move the name to the other listbox. When done
selecting, click on another button to process.
Sincerely,
Gene Wirchenko
_______________________________________________
Post Messages to: ProFox@leafe.com
Subscription Maintenance: http://mail.leafe.com/mailman/listinfo/profox
OT-free version of this list: http://mail.leafe.com/mailman/listinfo/profoxtech
Searchable Archive: http://leafe.com/archives/search/profox
This message: http://leafe.com/archives/byMID/profox/
** All postings, unless explicitly stated otherwise, are the opinions of the author, and do not constitute legal or medical advice. This statement is added to the messages for those lawyers who are too stupid to see the obvious.