Actually - I not only did a rebuild of the project, and of the EXE - I also attempted to build it as an APP - and run that. But, still the same problem.

I am, however, going to right now check into some of the suggestions from Richard - and see if I can make it work right...

Thanks again,

-K-

-----Original Message-----

From: profoxtech-bounces@leafe.com [mailto:profoxtech-bounces@leafe.com] On Behalf Of Desmond Lloyd

Sent: Thursday, February 02, 2012 5:05 PM

If I remember correctly, if you make a change to one of the programs

and don't rebuild the project that will occurr or some combination of

the above....

Regards,

Desmond.

On 2 February 2012 15:57, Richard Kaye <RKaye@artfact.com> wrote:

> I'm assuming you're working in a debug environment as opposed to production.

>

> Is the path to where your source code is located in the search path of your EXE? If not, can you use a CONFIG.FPW file to set your path at runtime?

>

> Is your project set to include DEBUG info? (See the project options.)

>

> --

> rk

>

> -----Original Message-----

> From: profoxtech-bounces@leafe.com [mailto:profoxtech-bounces@leafe.com] On Behalf Of Kurt Wendt

> Sent: Thursday, February 02, 2012 4:52 PM

> To: profoxtech@leafe.com

> Subject: Debugger - Source Not Available

>

> OK - here at my day job - most times I am working on older style systems

> - even the screen continue to look like FoxPro for DOS with White Text on Blue Screens. Its pretty scary to be in the year 2012 - but, still almost stuck in the DOS of DOS Circa 1989. And, as such, most of the coding I do is purely PRG's with VERY Few Graphical Screen work.

>

> However, on occasion - I get to be lucky enough to work on a separate project that is purely VFP, with regular graphical screens, a normal VFP menu - and getting to compile an EXE.

>

> Now - normally, when working with PRG/FXP's - I almost never come across this problem - as stated in the Subject. However, when compiling an EXE and running it - I have at times run into this problem. I put a Set Step On in a program or a screen/Form - and when its running (I start running the EXE from within a session of VFP) - I get the error in the Debugger

> of:

>            Source Not Available

>

>

>

> I'm getting it now - and its frustrated me so - that I decided I would post the problem here!

>

>

> Any thought?

>

> TIA,

>  -K-

_______________________________________________

Post Messages to: ProFox@leafe.com

Subscription Maintenance: http://leafe.com/mailman/listinfo/profox

OT-free version of this list: http://leafe.com/mailman/listinfo/profoxtech

Searchable Archive: http://leafe.com/archives/search/profox

This message: http://leafe.com/archives/byMID/profox/289EA162F5642645B5CF64D624C66A140B7CE929@us-ny-mail-002.waitex.net

** All postings, unless explicitly stated otherwise, are the opinions of the author, and do not constitute legal or medical advice. This statement is added to the messages for those lawyers who are too stupid to see the obvious.